Elimina
ESVP |
Elimina
ESH3Acquista |
|
| Marca | ROHDE&SCHWARZ | ROHDE&SCHWARZ |
|---|---|---|
| Prezzo |
2800.00€
Iva Esc. |
|
| Descrizione | Ricevitore di misura per EMC, banda 20-1300 MHz. | Ricevitore di misura per EMC, banda 9 kHz - 30 MHz. Misura di tensione, intensità di campo, corrente RF, rumore a larga banda ed attenuazione tra porte. Include generatore tracking. Fornito con calcolatore di controllo (PCA5) con software per EMC e monitoraggio spettro. |
| Caratteristiche tecniche | Frequency range: 20 to 1300 MHz Measuring range: -20 to +137 dBµV 4 switchable IF-bandwidths of 7,5 / 12 / 120 / 200 kHz Synthesizer: frequency resolution 1 kHz, with SSB 100 Hz High measurement accuracy (error <1 dB) Wide dynamic range: noise figure typically 8 dB (preamplifier on), third-order IP typically +20 dBm (preamplifier off) Automatic gain correction in the whole frequency range after calibration Measurement and display of voltage, field strength, current, spectral density and attenuation Additional evaluation capabilities for radiomonitoring modulation-depth and frequency-deviation measurements Remote frequency and frequency-offset measurements thanks to internal IF counter Connection of radiomonitoring recorders (maximum of five ZSG 3) SSB demodulator Storage of 10 complete device settings and of 5 data sets for automatic frequency scanning Special functions for frequency scanning with a set of up to 50 free selectable fixed frequencies Special functions for field-strength measurements in a moving vehicle Dimensions : 490 x 205 x 510 mm Weight: 28 kg |
It is suitable for manual and programmed use as a: - field strength meter in conjunction with suitable test antennas - selective RF-voltmeter (in conjunction with a current probe, it can also measure RF currents) - system unit in automatic test systems (only with option) Frequency range: 9 kHz to 30 MHz Sensitivity range: -30 to +137 dBµV 4 selectable IF bandwidths: 0.2 / 0.5 / 2.4 / 10 kHz Average, peak and quasi peak indication to CISPR16 and VDE0876 with programmable measuring times 75 MHz broadband IF output for panoramic display (for example spectrum monitor EZM) or spectrum analyzer Digital level indication in selectable units Measurement of frequency offset, frequency deviation and modulation depth Dimensions: 490 x 207 x 515 mm Weight: 25,5 kg |
English